EI Balance. Floating bases



SBS is a Balancing Support kit intended to provide you a way to build your own balancing machine at a very low cost with a very high quality. The Soft Bearing mechanism allows you to make high precision balancings on almost any kind of rotating parts. Due to the free radial movement of the suspensions, balancing is done at a frequency higher than the resonance frequency of the system. This mechanism allows the rotor to rotate around its gravity center instead of its geometric center.

For a better contact between the shaft and the SBS, the roller work supports have a swing system with a pitch up to 10 degrees, this way the SBS aligns automatically with the shaft to prevent misalignment on the bearing surfaces of the shaft.

Between the roller work supports and the SBS there is a height adjusting screw with a maximum lift height of inch, this mechanism allows to position the supports at different heights as well as it rotates freely around its own axis allowing a free influence from one plane to the other for dual plane balancing.